Energy Meter TS-838 ini mempunyai kemampuan mengukur pemakaian daya listrik. Fungsinya seperti kWh meter, namun lebih lengkap karena ada juga pengukuran tegangan, arus dan faktor daya. Selain itu tampilannya digital sehingga cukup memikat.
Features:
Measures various parameters: power (W), energy (kWh), volts, amps, hertz, power factor and maximum power (W), time, days – kWh is vital as this is what your electricity bills are based on!
Overload Protection Function, overload warning
Large, clear LCD display for easy reading (screen dimension: 50mm x 43mm)
Cumulative Kilowatt-Hour Monitor
Calculates electricity expenses
Electricity price setting by pressing SET, VALUE, DISPLAY
Can also set energy Price for night separately
Sets electricity price value which ranges 0.000COST/KWH ~9.999COST/KWH
Low power consumption
Power supply: 2*1.5V Button cell backup – allows meter to be moved (and viewed) without losing readings. NO Backlight
Specifications
Overload Protection Function: When the whole power exceeds the rated power of monitor, the monitor will cut off the current and prevent being damaged
Operating voltage: 120VAC
Frequency display: 50/60HZ
Operating current: max 15A
Voltage range: 110V-130V
Wattage display (Watts) is 0~1800W
-Current range: 0.01A~19.99A
Resolution: 0.5W
Indication of frequency: 46-65HZ
Measurement of consumption: 0.00 to 9999.99 KWh
Duration of indication: up to 9,999 hours 59 minutes
Berikut ini beberapa penampakan energy meter TS-838.
Pertama adalah penampakan ketika sedang mengukur pemakaian daya dari power bank Vivan M04. Hasil pengukuran menunjukkan power bank tersebut hanya menggunakan listrik 0.01 kWh untuk mengisi sampai penuh.
Berikut ini adalah bagian bawah dari energy meter TS-838. Pada body perangkat ini sama sekali tidak ada tulisan model ataupun merek. Nampaknya ini barang generik, yang dapat disablon ke merek lain.
Penyimpanan data di dalamnya menggunakan 2 buah batere LR44, supaya rekaman data pemakaian daya tidak hilang ketika listrik mati.
Berikut ini adalah tampilan pemakaian daya (87.5 watt).
Berikut ini tampilan pengukuran arus (0.45 ampere)
Manual
Berikut ini manual dari TS-838
Teks Manual
Energy Meter
Consumer Electronics User Manual
Index
Thank you for your confidence! …………4
Before using the appliance________________ 4
Proper Use——————————– 5
Safety Warnings……………………… 6
Recommendations for the use of batteries..9
Symbols: explanations…………………11
Commissioning………………………..11
Replacement of batteries………………12
Item description —…………………… 14
ICD…………………………………15
Overview of functions——————— 16
Preparation ………. ……….. -………….. 18
Regular time…………………………16
Indication of 12/24 hours……………..19
Setting the price per kWh……………..19
Introduction price for electricity at night.22
Performing the measurement…………….26
See the reading………………………27
Delete the values measured…………….28
History of consumption……………… 29
2
Other functions (for professionals)……….30
Overload……………………………….30
Power factor …———————…………….. 31
Troubleshooting…………………………33
Indications not common in the screen preview -—….—……—.—.—…………—………… 33
Clean…………………………..*…….33
Protection of the environment…………….34
Disposal of batteries ___________________…….. 34
Disposal of used appliances ……………..35
Packaging————————————35
Technical Data_______________________________36
Accuracy of measurement …………………37
Declaration of Conformity………………..37
Warranty conditions————————–38
Warranty Card…………………………..41
Thank you for your confidence!
We congratulate you on your purchase of your new gauge of the cost of electricity. We are sure that you will be satisfied with this modern appliance.
This device will help you ascertain the costs of energy consuming appliances. We hope that you can find all “electricity hogs” and, thus, minimize your electricity costs.
Before using the appliance
After unpacking and before each use verify that the article presents damage.If this is the case can not use the article please contact your seller.
The operating manual is in compliance with the rules and regulations in force in the European Union.Abroad also note the directives and specific legal provisions-country-!
Before using your appliance first carefully read the safety warnings and instructions.
So you can use all the functions in a safe and secure way. Keep very well the instruction manual as well as the receipt of proof of purchase and, if possible, on the packaging. If you lend, offer or sell the handset, also delivered the instruction manual.
Proper Use
The apparatus used to determine in consumption of energy consuming devices connected and the resulting costs.
The article is suitable only for private use and not designed for commercial use.
Use only in accordance with the instructions described in this manual d. Any other use is considered appropriate and may cause damage or even lead to injury.
The manufacturer does not assume any responsibility-made by damage or caused by using inappropriate.
Adverse competences security
Before putting your electricity cost meter in operation will take into consideration the following points:
An electrical installation or a botched network voltage too high can lead to electrical shock.
• The device is suitable only for use with 230 V / 50/60 Hz AC.
• Only connect the appliance to an outlet with contacts 230 V protection that has been properly installed.
• Do not use the appliance if it is visibly damaged or if the mind for power cord or plug is defective.
• Do not open the structure of the equipment, ask for your seller to repair specialists.
It should be taken to a specialist workshop. In the case of attempted repairs inde-pendent,a bad connection or a wrong operation cease ail rights regarding liability and warranty.
Only use the unit indoors and dry. Never operate the unit in humid or abroad.
The unit can not come into contact with sprayed water or other liquids. Keep a minimum distance of one meter from sources of moisture such as washbasins.
Never hold the device if your hands are wet.
Never grab an electrical appliance after it has fallen into the water. In a situation Semel-hante immediately
Do not tamper with the device.
Do not connect multiple metered electricity costs among themselves,
Do not cover the appliance with other materials by exists the danger of overheating.
When not using the device or if a malfunction occurs, disconnect the power source.
Dangers for children!
Often children do not recognize or underestimate the dangers.
Keep bags and materials used to pack the machine away from babies and small children. Danger of suffocation!
This appliance is not suitable for use by persons (including children) with a capacity of physical, sensory or intellectual abilities, or who does not experience and / or sufficient knowledge, unless they are under the supervision of a person that is responsible for their safety or that have had instructions on how to operate the device.
Supervise children and keep the appliance out of their reach to ensure that they do not play with the appliance. The their misuse means danger of electric shock!
Recommendations for the use of batteries
The meter cost of electricity in the functional with 2 batteries (button) of the type LR44 or AG 13 (these batteries are included).
Only use the battery type here specified, in order to prevent fire. Never attempt to charge the batteries.
- Do not throw batteries into a fire, not short-circuit the batteries or try to take them apart! Danger of explosion!!
- Keep batteries out of reach of children.
- Seek immediate medical attention if swallowing a battery.
- Immediately remove the batteries inside the device! Heightened risk of leakage!
- Those cells not exposed to extreme conditions, such as heaters over! As in radiators or in direct sunlight! Heightened risk of leakage!
- Avoid contact with skin, eyes and mucous membranes. In case of contact with battery acid, immediately wash the affected area with plenty of clean water and seek medical attention immediately.
- Only use batteries of the same type, not simultaneously use batteries of different types not mix old batteries with new batteries.
- Always replace both batteries at the same time.
- If necessary, clean the battery contacts and device before placing the stack.
Symbols: Explanations
You can the following symbols on the device:
Only be used in enclosed spaces
CAT II 300 V The instrument is approved for electrical circuits that if you find the train connected directly to the network of low voltage
| Note concerning the disposal of used appliances (see page 35)
Commissioning
The batteries come included with the appliance. Colo-batteries to work removing the insulation strips compartment. To open the battery compartment act according to what is shown below.
Replacement of batteries
1. Unplug the appliance.
2. To replace batteries, remove the two screws with a screwdriver and loosen the lid of the battery compartment.
3. Remove dead batteries and proceed to disposal / recycling collection point for used batteries.
4. Insert two new batteries (button cells 1.5 V, type LR44/AG13) in the battery compartment. By introducing them note-to correct the polarity (+ /), as shown in the lower compartment.
5. Replace the battery compartment cover and tighten the screws with a screwdriver.
Information:
The battery compartment just leave to introduce a direction, pay attention to the contours of the structure.
Before placing the appliance in operation of the battery compartment must be completely inserted.
If not use the device for some time remove the batteries from the inside in order to avoid that spend complete
Description of Article
- LCD. Display for the values of the readings, time and costs
- SET: Input mode of the time and cost of electricidade
- DISPLAY M/-: Show the time, costs or consumption
- VALUE H/+: Presentation of various values of readings
- OK: Save the intro / enter the price of electricity and heat overload
- Taken with integrated protection for children. When inserting the plug should fit into both pins simultaneously.
- Area for indicating the voltage, current, power, frequency, power factor and overload.
- Area for indicating the hour operating time, cost, power consumption, and money.
- Graphical indication of the energy consumption in the last 7 days.
Overview of functions
Save introductions; Choose 12 hours or 24 hours
Buttons
VALUE DISPLAY SET
©
Regular time
Save introductions; Show values
Introduce costs ofelectric/kWh
Save introductions
AOV
Hz
,eo» pN
l£sz
Introduce limits of overload
Press the button VALUE H/+ or DISPLAYM/-to call the measurement values and particulars.
The settings can only be changed when the corresponding values appear on the display (here shown in grey). For this,Press the SET button for 3 seconds.
Preparation
(no cost estimate) may skip this chapter and proceed immediately to page 60.
Regular time
l.Press the DISPLAYM/- until appears
2. Press the SET button for 3 seconds.
The hour indication flashes.
3. Set minutes with the VALUE H / +.
4. Adjust the minutes with DISPLAYM/-
5. Place the second zero-click
18
6. Complete and confirm the introduction with the OK button.
Indication of 12/24 hours
Press the DISPLA YM/- until the display appears
2. Press the OK button to adjust 12 hours or 24 hours.(In case you choose the indication of 24 hours, PM = after the 12:00).**
Setting the price per kWh 1. Press the DISPLAYM/- until the display shows aBSantM
2. Keep the SET button pressed during 3 seconds. The Euro zone indication flashes
19
Now enter the price of electricity per kilowatt-hour. If you have another price for electricity at night first enter price for the daily rate.
Bv I
a O.flflfl ‘
3. Adjust the value with the VALUE H/+ or DISPLAY M/-
4. Press the SET button. The first indication of the number of cents
flv
* Q. POO
5. Adjust the value in cents with the buttons
VALUE H+/ or DISPLAYM/- .
6. The following number of cents should regulate itself in the same way (example: 0285 = 28.5 cents).
20
Hi
Complete and confirm the input with the OK button.
If you have a tariff of electricity Normal (not bi-clockwise) then finished the introduction of prices here and can move to other menus with the DISPLAYM/-.
21
Introduction of the price for energy at night
9. Press the OK button.
On the display appear 4 strokes. This means that there is a second pricing for electricity at night
10. Press the VALVE H/+ to enter a price for electricity at night. The display now as follows:
22
11. Press the SET button for 3 seconds. The area of the indication of reduced blink rate
D V
12. Set the price for electricity at night conform the previously described (3-7 points).
After the introduction of prices press the OK button.The display shows now the time display. Now enter the time from which the electricity is accounted for by more expensive price.
23
fll
~ OEM
14. Press the SET button for approximately 3 seconds. The time display is intermittent try.
15. Set times with VALUE H/+, and the minutes with the DISPLAYM/v
16. To save press the OK button.
17 • Return to press the OK button to set the time from which boasts the price of electricity low (at night).
18. SET button pressed for about 3 seconds. The hour indication flashes.
24
19. Enter the time from which the side will be calculated in accordance with the price of electricity in the evening (adjust the hours with the VALUE H/+ and the minutes with the DISPLA Y M/-).
20. Save the entries by pressing the OK
21. With the OK button you can control the set values. These are presented in sequence to: price day – price night – hours of daily rate time of night tariff.
22. With the DISPLAYM/- then set another value (eg hours)
25
Implementation of measurement
After entering the time and price of electricity could initiate measurements.
1. Only connect the appliance to an earthed socket 230 V,which has been properly installed.
2. Now connect (s) the consumer (s) or the consumer (via a plug casing) to meter the costs of electricity.
Note that the total power of consumers connected must not exceed 3680 watts.
26
See the readings
The following values are displayed:
• V (voltage)
• A (current a dual)
• A l’ux(maximum current )
• W (absorbed power)
• WMAX(maximum power absorbed)
• KhuuJ (current value of overload
power value of the overload )
• Hz (Frequency)
• (power factor cos )
To see long-term readings repeatedly press DISPLAY M/-.
We present the following values:
• © (current time)
• MM — (total consumption in kWh)
. — HOB (price / kWh)
. QSBIDBB (price / kWh €)
• CEB ORB (total time of measurement)
Delete the values measured
In case of need can also clear the values of total consumption (kWh), the time measuring total and total costs, by pressing and holding the OK button:
1. Press and hold VALUE H/+ until Strom (A) on the display.
2. Hold down the OK button until the device beeps. All values are deleted.
History of consumption
Its cost of the electricity meter stores the energy consumption of the equipment connected over a period of past 7 days.
The LCD display shows a graphical presentation below, each column represents a day (-1 = Yesterday, = -7 a week ago).
DAILY CONSUMPTION (kWh) 1 Bar • 15 kWh
-7 -6 -5 -4 -3 -2 -1
The individual bars in the columns represent the kWh consumed.
According to consumption changes the scale, so that each bar corresponds to l, 2,5, 10 or 15 kWh.
29
Other functions (for professional)
Overload
Adjust the values of the overload
With this function you can determine in which current value (16 in max) or power: 5 WAT-cia (3680 W Max.) the appliance shall issue a overload warning.
When one of the values of overload is ultra-past appears on the display dH2Z2!!^B blinking and the device sends a beep.
1.
Hold the button VALUE H/+ to
appear
OVERLOAD
on the display.
2. Hold down the SET button for
about 3 seconds.The display flashes to indicate to the amps, or W for watts.
3. With the buttons VALUE H/+ or DISPLAY M/-
30
4. Press again the SET button. The first digit in the display flashes.
5. Set the desired values with the buttons VALUE H+/ot DISPLAY M/-.
6. With the SET button can go to the next digit and regulate it the same way.
7. At the end confirm the introduction of values with the OK button.
Delete the values of overhead
1. Press the VALUE H/+ until Amax (maximum current) and Wmax (maximum power) on the display.
2. Mold down the OK button to the provi-tive beeps. The value of the corresponding on-load is then removed.
Power Factor
The power absorbed by a consumer in W is calculated from the current in A multiplied by the voltage V with the following formula:
P [W] = U [V] * I [A]
In the case of appearance of capacitive or inductive consumer occurs, however,
gap between the course of current and voltage, i.e. the current follows the course of the cur-so the voltage or vice versa. With the phase angle <p gets then the relationship between the effective power, reactive power and apparent power.The reactive power ensures that a coilor an electric motor generates a field magneti-co. The energy of the reactive power is initially stored in the magnetic field, but with each periodic magnetic field reduction back to be sent to the network. So, for the power we have then the following formula, taking into account the actual values U e I:
p = U * I * coscp – U * I * cos(2cot+tp)
* The expression contains a sum independent of time, the active power P = U * I * coscp,
• A.summation with temporal dual frequency and amplitude S = U * I,
a variant whose average sum is zero.
The size S is called apparent power.
Troubleshooting
Indications not common in the visu-screen Demoralization
If the display screen presents information not common or if it does not react to touch the buttons there should be an initiation device.
1. Remove the appliance.
2. Remove batteries briefly and then return to place them as shown on page 33.
Caution: When removing the batteries, all intro-duced values arc reset to factory settings and have to be re-introduced later.
Cleaning___________
Danger of electric shock!
• Always turn off the meter of the current cost of electricity when cleaning it.
• The system can not be washed or submerged in liquid-Gido.
For cleaning use only a soft doth
33
Environmental Protection
Disposal of batteries
Cells and batteries can not be placed in household waste!
Each consumer has a legal obligation to deliver cells and batteries at a point Collection of your community, your neighborhood or in the store.
All batteries can be taken to a disposal environmentally friendly.
Cells and batteries containing harmful substances are marked by signs and by their chemical symbols
(Cd as cadmium, Hg mercury, Pb for lead).
34
Disposal of used appliances
(Applicable in the European Union and other European countries with separate collection of recyclable materials)
The apparatus used should not be placed in household waste! When starting from a certain point no longer able to use the device, each consuming Pain has a legal obligation to deliver separately used appliances, for example, at a collection of community / your neighborhood. Thus it is possible to ensure that old appliances are properly utilized, reducing in this way the negative impacts on I he environment.
This is why electrical appliances is eslab-tram marked with the symbol above.
Packing
I )ispose of packaging materials that no longer requires an appropriate and separate them properly, giving them an appropriate collection poinl.34/35
Technical Data
Input voltage / output voltage: 230 V ~ / 50 Hz
Power consumption: Max. 16
Range voltage: 190 V – 270 V
Current range: 0.01 A – A 19.999
Power range: 1 W – 3680 W
Indication of frequency: 46-65 Hz
Resolution: 0.5 W
Measurement of consumption: 0.00 to 9999.99 kWh
Duration of indication: up to 9,999 hours 59 minutes
Since our products are constantly updated and improved technical changes are possible and design.
Accuracy of measurement
V>lt: ± 3% of measurement,,a3,
Amperes : ± 3 % of measurement ±0,002 A1)2)3) Watt: ±3%ofmeasurement ±1 W”2131
KWh: ±3%ofmeasurement±0,1 kWh,,2)31
Factor: ± 0,1 % power factor measured
0,7 =< cos =<1,02)4>
1) Frequency: 46-65 Hz
2) Measurement in a normal room temperature
3) Distortion of voltage/current < 15%
4) Current > = 1.00A/sinusoidal.
Frequency = 50 or 60 Hz.
Without electronic circuits
Declaration of Conformity___________
We guarantee that the product in respect to the standards required by law.
Warranty conditions
The product purchased by you was made with the utmost care and subjected to continuous monitoring during production.
The warranty period is 1 years and begins on the date of acquisition.
If, despite the care processes of production and verification, there is an abnormality in the unit, the repair must be carried out by specialists.
In the case of any request for information or replacement parts, always quote the model as the signpost on the instrument.
Warranty service is provided in accordance with statutory / country-specific (proof by invoice). Excluded from the warranty service, the damage that is caused by wear and teas overloading inappropriate or handling.in the event of a complaint, first contact the customer support service.
This service will be glad to inform you with regard to the following procedures. Please DO NOT send your article unless it is required!
You should keep the receipt as proof of same. This warranty does not apply in case of damage caused by accident, improper handling and / or force majure.
The warranty will be voided if unauthorized persons have made any kind of manipulation on the device.
In the case of sending the unit to our service, make sure that the same be done in appropriate packaging. We do not hold us accountable for any damage caused by transportation. In case you need Our service guarantee, please go to our customer support service:
******Q)|jp2|jy**********
Plume number 00800 / *************
j\ i |; *****(»*********
Warranty card
HIGHLIGHT THIS CARD AND ADD IT TO THE APPLIANCE
Article: Electric consumption counter TS-838
Surname:
Name:
Street :
Postal code and city:
1elephone with area code:
Customer’s signature: